This versatile instrument accepts a 0-20mA or 4-20mA process input signal.
It is ideal for a variety of applications, including depth or level sensors and pressure, temperature or humidity transmitters.
The controller supplies 24V excitation, allowing you to power a 2/3-wire input loop. It comes in a hassle-free DIN-rail mountable case with a built-in LCD display for simple operator interface.
- 5 buttons
- 2 x 8mm, 8-digit LED display
- 35mm DIN rail case -
(H x W x D) 101 x 45 x 119.5mm
Texmate SC-PRC process controller feature:
- Current (0-20mA or 4-20mA) input
- Input signal averaging
- Suits a variety of applications, including depth or level sensors and pressure, temperature or humidity transmitters
- Key-in calibration (no input signal needed)
- Dual display rows
- Simple, intuitive interface with scrolling text prompts
- Security PIN protected setup and setpoint access
The Texmate SC range features a broad spectrum of versatile instruments that are ideal for either stand-alone control or as an interface to a PLC.
Measuring in at 10cm high and under 5cm wide, these compact controllers are hassle-free to install, with an easy snap-on clip for a 35mm DIN rail.
Unlike many competing DIN-rail systems, they also feature a built in 2 x 8-digit LCD display for simple operator interface.
All SC units come standard with 2 relays (5A Form A), and have the option of adding 1 serial port (RS232/485) and up to 2 analogue outputs (single 4-20mA/0-10V, or dual 4-20mA for selected models).
Input signal | 0-20mA or 4-20mA |
| Excitation | 24V DC (50mA max) |
| Sampling rate | 10Hz |
| Resolution | 16-bit |
| Accuracy | 0.05% of reading |
| Temp. drift | 0.1 to 99.9999, 999.999 or 9999.99 |
| Accuracy | 0.005% |
| Temp drift | Typically 50ppm/°C |
| Relay outputs | 2 x 5A form A relays |
- Optional - | |
| Analog output | Isolated 16-bit 4-20 mA or 0-10V output |
| Serial port | Front panel isolated RS232/485 |