Yes. However, the method of temperature control must address the fact that the heat loss will be different for the two ambient conditions.
For line-sensing control the sensor should be located on the outside portion of the pipe.
With ambient sensing the sensor will be outside as well. In both cases, temperatures of the inside/indoors pipe section should be determined to make sure that product, pipe, or cable maximum temperature ratings are not exceeded.
Yes. The heat losses without thermal insulation are excessive and not practical to compensate for with heat tracing.
Focus is the most critical element in recording a thermal image. Focus and the perspective of the target area are the image characteristics that cannot be changed.
Yes. Thermal imagers operate in a range of the spectrum outside the visible light wavelengths and is unaffected by light (except as it is a source of heat).
Here are some basic maintenance checks we recommend you do often to get the most out of your flue gas analyser:
Virtually every heavy industrial process involves a combustion process. These combustion processes result in the emissions of harmful pollutants, collectively called flue gas.
Flue gas analysers are required to perform measurements of the gases.
We here at unitemp are always excited to hear from you. It is your ideas and requirements that make us strive to perform better every day.
Therefore, we are now launching our very own UNITEMP BLOG in order to enable you to comment on any of our tips & tricks, case studies, industry feedback & discussion topics:
Thank you for your enquiry below. Our heat tracing specialist will be in contact with you soon...
Good day. Please quote on heating wires for a freezer room (-30 deg.C)
Heating wires to...